Companion Product - Pyrolytic Oven

Fault Code	Possible Cause	What to Do
A1	The oven has overheated.	Allow the oven to cool down. Once the oven has cooled down and the door has unlocked, the alert code will disappear. You can now use the oven again.
A2	Door lock error: the door cannot be locked after you have started a Self Clean cycle.	Turn the power to the oven off at the wall and on again. Wait approximately 10 seconds. This is to allow the door lock to return to its initial position. Set the clock. Refer to ‘Setting the clock and first use’ in your User Guide for instructions. Try starting a Self Clean cycle again, making sure that you close the door firmly. Refer to ‘Using the Self Clean function’ in your User Guide.
A3	Door lock error: the door cannot be unlocked after a Self Clean cycle has finished.	Turn the power to the oven off at the wall and on again. Try pressing on the oven door to help the door lock disengage. If this doesn’t help and the alert code reappears, you will need a Service Technician to assist with this - Click Here to schedule a visit.
F + Number eg: F2	Technical fault.	Note down the alert code. Wait until the cooling fans have stopped and the oven has completely cooled down. Turn the power to the oven off at the wall. You will need a Service Technician to assist with this - Click Here to schedule a visit.

You may need assistance from one of our qualified service technicians.
Click on the button below to schedule a visit.