Installation Sequence

Last updated
Save as PDF

Follow the Installation sequence relevant to your cabinetry.

NOTE: Product is designed for Flush inset Installation only.

RS36A80J and RS36A80U models

Screen Shot 2018-01-05 at 2.25.12 PM.png

Frameless Cabinetry
(Frameless: Aligns the product with the cabinetry)

1. Safety and Warnings
2. Before Installation
3. Components List
4. Maximum distance of hose and power cord
5. Product and Cavity Dimensions
6. Cavity Preparations
7. Custom Door Panel Dimensions
Screen Shot 2018-01-05 at 2.39.06 PM.png
9. Attach Side Base Brackets and Installation Aiders
10. Connect to Water and Electrical Supply
11. Pre-Aligning your Product
12. Temporarily fixing your Product and attaching Door Studs

13. Install Water Filter Cartridge and Kickstrips
14. Assemble Door Panel Set
15. Hanging Ice & Water Door Panel
16. Hanging Non-Water dispensing Door Panels
17. Ice and Water Initiation
18. Attach Fixing Brackets
19. Attach Covers & Toe Kick
20. Attach Bottom Kickstrip
21. Attach Side Trim Brackets
22. Attach Side Trims
23. Adjusting Hinge Tensioning Screws
24. Final Checklist