Skip to main content
Fisher & Paykel Product Help

Assemble Door Panel Set

 

The assembly of Fisher & Paykel door panel sets (EZKleen stainless steel door panels) and custom door panel sets are outlined below. For Fisher & Paykel door panel sets, only remove the protective film for handle installation. This will protect the finish of the door panels until installation is complete.

 French Door Panels

1. Mounting handle (Refer to A)

For Fisher & Paykel door panel sets, remove
the plastic plugs from the handle holes x4. Align the handle to the holes and secure with screw handle x4 (M5 x 25 pan head socket screws).

For custom panels, ensure handle is secured 2 9/16” (65 mm) from the inner edge of the panel to the center – this will avoid interference with bracket installation.

2018-01-08_1314.png

2.  Hanging bracket (Refer to B)

For Fisher & Paykel door panel sets, align the bracket to the holes and secure with screws x4 (M5 x 14 Mush Phillips SS).

For custom panels, secure bracket with screws x4 (#8 x 16 Mush washer screws).

 

3. Side brackets and straps (Refer to C)

For Fisher & Paykel door panel sets, align bracket and strap to the holes on the side of the panel and secure with screws x2 (M5 x 14 Mush Phillips SS).

For custom panels, secure bracket with screws x2 (#8 x 16 Mush washer screws).

Repeat this process for all brackets and straps, and remaining French door panel.

2018-01-08_1335.png

 Drawer Door Panel

4. Mounting handle (Refer to D)

For Fisher & Paykel door panel sets, remove the plastic plugs from the handle holes x4. Align the handle to the holes and secure with screw handle x4 (M5 x 25 pan head socket screws).

For custom panels, ensure handle screw heads are counter sunk into the back
of the panel to avoid interference with hanging bracket.

2018-01-08_13151.png

5.  Hanging bracket (Refer to E)

For Fisher & Paykel door panel sets, align the bracket to the holes and secure with screws x6 (M5 x 14 Mush Phillips SS).

For custom panels, secure bracket with screws x6 (#8 x 16 Mush washer screws).

2018-01-08_13152.png

6. Side brackets and straps (Refer to F)

For Fisher & Paykel door panel sets, align bracket and strap to the holes on the side of the panel and secure with screws x2 (M5 x 14 Mush Phillips SS).

For custom panels, secure bracket with screws x2 (#8 x 16 Mush washer screws).

Repeat this process for all brackets and straps.

2018-01-08_1316.png

 

  • Was this article helpful?