Skip to main content
Fisher & Paykel Product Help

Level Your Product

 

  •  It is important that all four corners of the product is supported firmly onto the floor to eliminate any movement.

  • Installing the appliance on a soft, uneven, or not level floor may result in twisting of the product and poor door sealing.

  • Raise the product using an 7/16” (11 mm) hex socket or 3/16” (4 mm) hex Allen key. One turn of height adjusting nuts is equivalent to 1/16” (1 mm) height travel.

    Note: maximum travel 13/16” (20 mm).

1. Level the front of the product until it is flush with adjacent walls. Turn clockwise to raise roller or counter-clockwise to lower roller.

Repeat on opposite side. 


2018-01-08_1304.png

2. Raise the rear of the product until the refrigerator doors are flush with the front face of adjacent walls. Turn clockwise to raise roller or counter-clockwise to lower roller.

Repeat on opposite side.

Gently push the front of the product to check the stability, and ensure side gaps are even with enclosure.

 

  • Was this article helpful?