Skip to main content
Fisher & Paykel Product Help

Parts Supplied

These parts have been supplied to assist with the Installation of this appliance.

Screen Shot 2018-01-04 at 2.28.43 PM.png

Clamping brackets (4)
and screws (4)

CI122DTB only
Clamping brackets (2)
and screws (2)

Screen Shot 2018-01-04 at 2.29.33 PM.png

Foam tape (1)

Installing multiple products

Screen Shot 2018-01-04 at 2.53.21 PM.png

  • Note: We recommend installing products in separate cutouts with a minimum distance of 3/16” (5mm) between the glass edges.
  • If installing multiple products adjacent to each other within the same cutout, a separate joining strip kit is required for installation.
  • The kit is available from the nearest Fisher & Paykel Authorized Service Centre or our website
  • If installing different products adjacent to each other (eg a wok burner next to an induction cooktop), the minimum clearance measurements for the different products may vary. Always use the greater distance.


  • Was this article helpful?