Cabinetry Dimensions – Wall Mounted (i.e Installed with a F&P Coffee Maker)
When installing under an F&P Coffee Maker you must ensure the supplied anti-tip bracket is installed, unless there is a fixed shelf above the drawer acting as an anti-tip obstacle.
If installing under the F&P Coffee Maker, ensure there is the 2” (50mm) gap at the back of the cabinet and the 7 7/8”2 (200mm2) toekick cutout required for airflow. Refer to the Coffee Maker Install instructions.
|
Front |
Side |
Plan |
In a wall mounted installation, there needs to be an 11/16" (18mm) Spacer fixed underneath the warming drawer first to raise it to the require height.
| Cabinetry Dimensions | Inches (mm) |
|---|---|
|
M. Minimum inside height of cavity
|
23 1/4" (590) 22 1/2" (570) |
| N. Inside width of cavity | 22" (560) |
| O. Minimum inside depth of cavity | 22 1/4" (565) |
* PO - POWER OUTLET. Ensure there is an accessible earth power within 35 7/16" (900mm) of the Centre rear of the product.
When installed in combination with a companion product the companion product may be placed directly onto the warming drawer. It is not necessary to place a shelf between the products. A built-in shelf at the base of the cabinetry able to support the weight of both products is required.
