Skip to main content
Fisher & Paykel Product Help

Integrated Models Only - Custom Front Panel Calculations

Custom front panel calculations for Integrated Models only.

Front Panel Specifications

  • 5⁄8 - 13⁄16” (16-20 mm) panel thickness.
  • Maximum weight of panel: 20 lb (9 kg).
  • Adequately sealed to withstand moisture (122OF/50OC @ 80% RH). Because of it being a hot and wet environment generally, the back and sides of the panel should be completely sealed with a waterproof vapor barrier (ie polyurethane) to prevent damage to the panel.
  • The back of the panel (including any integrated handle) should be completely flush so that the seal between the panel and the rubber trim is maintained.

The following calculations assume the top of the panel is aligned with the top of the adjacent cabinetry:

2018-01-08_1407.png

Width of Panel

Height of Panel

Measure A (the width between adjacent door/drawer fronts) and write it in the first box below, then complete the equation.

Measure B and write it in the first box below, then complete the equation.

2018-01-08_1408.png 2018-01-08_1409.png
 

When the top of the dishwasher has to be lower than the adjacent cabinetry, the panel can be increased in height.

 

  • Was this article helpful?