Skip to main content
Fisher & Paykel Product Help

Tall Height Integrated Models Only - Custom Panel Calculations

 

Width of all Panels

Front Panel Specifications

Measure A (the width between adjacent door/drawer fronts)
and write it in the first box below, then complete the equation.

7b width all pan.PNG

  • 5⁄8 - 13⁄16” (16-20 mm) panel thickness.
  • Adequately sealed to withstand moisture (122OF/ 50OC @ 80% RH).
  • Maximum weight of each panel: 20 lb (9 kg.

Height of the Upper Panel

Toekick Panel Specifications

7b Height of upper pan.PNG

The ‘upper panel extension’ B allows for the top of the upper panel to extend above the chassis where required.
  • min. 3⁄8” (9 mm) panel thickness if using supplied screws.
  • Adequately sealed to withstand moisture (122OF/ 50OC @ 80% RH).
  • You may choose to affix your custom toekick panel either by screwing it to the supplied mounting bracket or gluing it on the supplied prefinished toekick panel.

Height of the Lower Panel

7b front panel & toekick specs.PNG

Measure C (door/drawer height (or equivalent)) and write it in the
first box below, then complete the equation.

7b Height of lower pan.PNG

Height of the Toekick Panel

Measure D (height from the top of adjacent cabinet door fronts to the floor)
and write it in the first box below, then complete the equation.

7b toekick measure.PNG

 

  • Was this article helpful?