Drainage & Plumbing Options (3 to Choose from)

Screw Drain hose support to back wall at correct height.

If space is limited for fixing, push hose through drain hose support to required height

Ensure that drain hose is installed as close to the underside of the benchtop as possible. This will ensure no waste re-enters the drain  hose in the event of poor flow or a blockage in the plumbing.

Ensure the drain hose does not extend into water retained in the trap; an air gap is required to prevent waste water from siphoning back into the tub.

Ensure that drain connection will comply with local plumbing regulations.

Secure drain hose to drain hose joiner and secure to Air Break

Ensure that drain connection will comply with local plumbing regulations.

Screw Drain hose support to back wall at correct height.

If space is limited for fixing, push hose through drain hose support to required height

Ensure drain hose is routed straight to joiner. Remove excess  drain hose material if necessary.
Do not shorten the inlet hose.

Ensure that drain connection will comply with local plumbing regulations.