Skip to main content
Fisher & Paykel Product Help

Attach Cavity Bracket - Tall Height Integrated Models for 18 7/8" (480mm) Cavity Only



Important-Icon.png The enclosed cavity bracket is fitted before installation in order to conceal the gap at the top of the cavity left after installation.

Tall Height Cavity Bracket #1.PNG

Ensure the cavity panel bracket is positioned so that the “F” arrow is pointing  towards the front of the chassis.

Firmly push the bracket so that the prongs engage with the top tabs and it clicks into place.

Important-Icon.png Ensure the prongs have not been driven down into the
chassis as this will damage the lid below.

Tall Height Cavity Bracket #2.PNG

Ensure the top trim seal is facing forward after attaching the bracket.