Skip to main content
Fisher & Paykel Product Help

Cabinet Trims Installation

 

 

Install Parts

Cabinet Side Trim Assembly.PNG

Cabinet side trim assembly (2)

Dual Lock Strip.PNG

Dual-lock strip (4)

 

Tools

Cross Head Screwdriver.PNG

Cross-head screwdriver

Cutter.PNG

Cutter

 

Install the Side Trims

Four (4) dual-lock strips are pre-installed along each side trim. 

  1. Peel off the liners from the dual-lock strips (A).

Install Side Trims_A.PNG

  1. Position the trim on the throat with an angle (B).
Install Side Trims_B.PNG

 

Install Side Trims_C&D.PNG Install Side Trims_E&F.PNG
  1. Slide the trim behind the lower hinge (C), then the top hinge (D). Hold the same angle when sliding the trim.
  1. Slot trim in behind top hinge pocket (E), then press (F) adhesive to cavity ensuring trim is also tight against product inner face.

 

  • Press firmly on the dual-lock strip locations to ensure the side trims are securely attached.
  • For dual installation, do the same steps for each product.

 

Dual Install Joiner Kit

Centre Trim.PNG

Centre trim (1)​​​​​​​

Dual Lock Strip.PNG

Dual-lock strip (4)​​​​​​​

 

Reinstall the Top Trim

  1. Slide the top trim into hinge pocket of the cabinet (A), and then engage the dual lock at the non-hinge side (B).

Reinstall the Top Trim.PNG

 

Install the Centre Trims (for Dual install only)

Four (4) dual-lock strips are pre-installed along the centre trim.
1. Peel off the liners from the dual-lock strips (C). 2. Position the trim between the throats of both cabinets (D).

Install Centre Trims_C.PNG

Install Centre Trims_D.PNG

3. Push and press the trim on the products/throat (E). Note: Make sure the top end of the trim is pushed up against the alcove ceiling before fixing the position. 4. Press the centre trim to fix the position (F).
Install Centre Trims_E.PNG ​​​​​​​Install Centre Trims_F.PNG

 

 

 

  • Was this article helpful?