Skip to main content
Fisher & Paykel Product Help

Water & Power Supply Connection

 

 

FOR NZ & AU Only

Water Fittings Kit (Ice and Water models only)

Collet Locking Clip.PNG

Collet locking clip (1)

1_2 SS Braided Hose with Adaptor.PNG

1/2 BSP Stainless steel braided hose with adaptor (1)

  • Old water fittings (hose-sets) should not be reused.

  • The product includes a stainless braided water line hose.

  • The shut off valve should be accessible.

  • Make sure each product is connected to a separate power socket.

  • The water connection steps below are intended only for the professional installer.
  • Connect to potable drinkable water supply only.
  • DO NOT install on line pressure above 120psi (827kPa) or below 22psi (150kPa). ●● DO NOT use on hot water supply (100°F [38°C max.]).

 

Connecting to Water Supply (Ice & Water Models Only)

  1. Move the product in front of the cabinetry close enough that you can access behind for power and water connections.

  2. Connect one end of the braided water hose to the water tap (A). Flush water through the hose prior to connection to the product to remove any debris in the hose.

  3. Insert the adaptor end of the hose through a hole at the rear of the plinth (B).

Connecting to Water_NZAUS #1.PNG

 

Connecting to Water_NZAUS #2.PNG

 

  1.  Pull the adaptor end of the braided hose all the way to the front of the product and insert the tube end of the adaptor fully into the PRV (C).

  2. Secure the connection with a locking clip between the PRV and hose end of the adaptor (D).

  3. Check the connection and open the water supply to test for leaks.

  • The water supply connection is applicable for freezer models only.

  • For dual installation, do the steps for both first and second products.

  1. At the back of your product, uncoil the power cord from the clips (E) and connect to the power supply (230 VAC, 50 Hz) (F).

    • You will hear a chime sound when the product is powered on and automatically goes into ‘Installer (standby) mode’.

    • Refer to ‘User guide’ for more details on activating the product.

 

FOR GB & EU Only

Water Fittings Kit (Ice and Water models only)

Collet Locking Clip.PNG

Collet locking clip (1)

3_4 19mm BSP Water Fitting.PNG

3/4” (19mm) BSP water fitting (1)

1_4 6.4mm Plastic Tubing.PNG

1/4” (6.4mm) plastic tubing (1)

  • Old water fittings (hose-sets) should not be reused.

  • The product includes a stainless braided water line hose.

  • The shut off valve should be accessible.

  • Make sure each product is connected to a separate power socket.

  • The water connection steps below are intended only for the professional installer.
  • Connect to potable drinkable water supply only.
  • DO NOT install on line pressure above 120psi (827kPa) or below 22psi (150kPa).
  • DO NOT use on hot water supply (100°F [38°C max.]).

 

Connecting to Water Supply (Ice & Water Models Only)

  1. Move the product in front of the cabinetry close enough that you can access behind for power and water connections.

  2. Attach the water fitting to one end of the plastic tube and connect it to a water tap (A). Flush water through the water tube prior to connection to the product to remove any debris in the hose.

  3. Insert the other end of the tube through a hole at the rear of the plinth (B)

Connecting to Water_GBEU #1.PNG

 

Connecting to Water_GBEU #2.PNG

 

  1. Pull the end of the plastic tube all the way to the front of the appliance and insert 16mm into the PRV (C).

  2. Secure the connection with a locking clip between the PRV and hose end of the adaptor (D).

  3. Check the connection and open the water supply to test for leaks.

  • The water supply connection is applicable for freezer models only.

  • For dual installation, do the steps for both first and second products.

  1. At the back of your product, uncoil the power cord from the clips (E) and connect to the power supply (230 VAC, 50 Hz) (F).

    • You will hear a chime sound when the product is powered on and automatically goes into ‘Installer (standby) mode’.

    • Refer to ‘User guide’ for more details on activating the product.

 

 

 

  • Was this article helpful?