Skip to main content
Fisher & Paykel Product Help

Setting the clock

To set the clock

When the power to the appliance is turned on or restored after a power failure Screen Shot 2017-06-28 at 9.29.54 AM.png will flash in the display.

  1. Press Screen Shot 2017-06-28 at 9.32.15 AM.png and Screen Shot 2017-06-28 at 9.21.56 AM.png together - the display will stop flashing. The clock is now set for Screen Shot 2017-06-28 at 9.29.54 AM.png
  2. Press Screen Shot 2017-06-28 at 9.32.15 AM.png and Screen Shot 2017-06-28 at 9.21.56 AM.png together again to change the time. The display will flash.
  3. Press Screen Shot 2017-06-28 at 9.22.16 AM.png and Screen Shot 2017-06-28 at 9.22.22 AM.png to set the time. After a few minutes the display will be steadily lit, showing the time is set.

To change the time

  1. Press Screen Shot 2017-06-28 at 9.32.15 AM.png and Screen Shot 2017-06-28 at 9.21.56 AM.png together. The display will flash.
  2. Press Screen Shot 2017-06-28 at 9.22.16 AM.png and Screen Shot 2017-06-28 at 9.22.22 AM.png to set the time.

After a few seconds the display will remain steadily lit, showing the time is set.

  • Was this article helpful?