Skip to main content
Fisher & Paykel Product Help

Using your induction cooktop


 

C1302CTB model

Cooking Zone Zone Diameter Power Powerboost Recommended Minimum Pan Size

160mm

1200W

1400W *

110mm

200mm

2300W

3000W *

145mm

 *  Maximum output when set on PowerBoost.

Touch controls overview

To start cooking

  1.  Touch and hold the ON/OFF control for 2 seconds.
  • The touch control display will light up.

  1.   will appear in the cooking zone displays.

  1.  Place a suitable pan on the cooking zone you wish to use.
  • Make sure the bottom of the pan and the surface of the cooking zone are clean and dry.

Always place small pans in the centre of the cooking zone.

 

  1.  Touch the selector of the cooking zone you wish to use.
  •  will appear in the timer display.
  • The selected cooking zone display will glow more brightly and the other cooking zone display will dim.

  1.  Select a heat setting by touching   and  
  • The setting will appear in the display of the selected cooking zone.

  • If you don’t choose a heat setting within 10 seconds, the cooktop will automatically turn off. Start with step 1 again.

  1.  You can modify the heat setting at any time during cooking.
  • Touch the selector of the cooking zone you wish to adjust.
  • Adjust the heat setting by touching  and 
  • The new heat setting will appear in the display of the selected cooking zone.

If a display flashes   alternately with the heat setting

This means that:

  • you have not placed a pan on the correct cooking zone or

  • the pan you’re using is not suitable for induction cooking or

  • the pan is too small or not properly centred on the cooking zone.

  • No heating takes place unless there is a suitable pan on the cooking zone.

  • The cooktop will automatically turn off after 10 minutes if no suitable pan is placed on it.

When you have finished cooking

To turn off an individual cooking zone, but continue to use the other cooking zone

  1.  Select the cooking zone you want to turn off.

  1. Decrease its heat setting until the display shows . If the cooking zone surface is too hot to touch, H will replace in the display.

To turn the whole cooktop off

  1. Touch and hold the ON/OFF control. 

Beware of hot surfaces
H will appear in the display of any cooking zone that is too hot to touch. It will remain on and steadily lit even when the cooktop is turned off. It will disappear when the surface has cooled down to a safe temperature.

Locking the controls
  • You can lock the controls to prevent unintended use (for example children accidentally turning cooking zones on).
  • When the controls are locked, all controls except the ON/OFF control are disabled.

Do not lock the controls while a cooking zone is in use. If you do, you can always turn the cooktop off with the ON/OFF control in an emergency.

To lock the controls

  1. Make sure that the cooktop is turned on but no cooking zone is in use.

  2. Touch the rear cooking zone selector and  together.

  1. Touch and hold the rear cooking zone selector.
  •  will appear in the cooking zone displays, indicating that the controls are locked.
  • Note: the cooktop will automatically turn off after 10 seconds, but the controls will still be locked when you turn the cooktop on again.
To unlock the controls

  1. Make sure the cooktop is turned on.

  2. Touch the rear cooking zone selector and  together.

  1.  will appear in the cooking zone displays.
  2. Touch and hold 
    The cooktop will turn off.
  3. The cooktop controls are now unlocked. You can now turn your cooktop on and start cooking.
  • Was this article helpful?