Flush Mounting Installation (Optional)

Last updated
Save as PDF

We do not recommend flush mounting and sealing as servicing requires the cooktop to be removed from the benchtop. The owner carries all risk for flush mounting the cooktop.

Refer to ‘When you you install the appliance’ in the Safety and Warnings section before you flush mount this appliance.

Electrical connection is made at the right rear.

Property	Size (mm)
Overall height of product (excluding burners, dials and pan supports)	79
Overall width of product	900
Overall depth of product	530
Height of chassis (below top of counter)	76
Width of chassis	860
Depth of chassis	487
Overall width of routered recess	905
Width of cutout	875
Overall depth of routered recess	535
Depth of cutout	494
Corner radius of cutout	10
Corner radius of routered recess	max. 5
Height of routered recess	3
Distance from top of counter to center of gas inlet on product	76
Distance from edge of chassis to gas inlet on product	22
Minimum clearance below top of benchtop to: rear top of oven* installed below cooktop or cabinetry thermal protection barrier	81 81