Skip to main content
Fisher & Paykel Product Help

Using your dishwasher - quick reference

Details information on starting a wash and what to do after a wash.

Starting a Wash 

  1. Remove food scraps and load dishes carefully
    For more detail, see sections ‘Caring for your dinnerware’ and ‘Loading’.

  1.  Add detergent
    For more detail, see sections
    Water hardness and dishwashing’, ‘Wash programmes and detergent quantities’, and ‘Adding detergent

  1. Turn power on (also check water is turned on)
    For more detail, see section ‘CH and CHP models - Controls and starting a wash’ or ‘CK models - Controls and starting a wash’.

  1. Check rinse aid level, refill if necessary
    For more detail, see section ‘Using rinse aid’.

  1. Check that nothing obstructs the spray arms, then close the door firmly

  1. Select wash programme
    For more detail, see section ‘CH and CHP models - Controls and starting a wash’ or ‘CK models - Controls and starting a wash’, and ‘Wash programmes and detergent quantities’.

CH & CHP models

CK models

  1. Start wash OR set Delay start
    For more detail, see section ‘CH and CHP models - Controls and starting a wash’ or ‘CK models - Controls and starting a wash’ and ‘CH and CHP models - Setting Delay start’ and ‘CK models - Setting Delay start’.

 

After the Wash

  1.  Open the door slightly and leave ajar to help drying
    For more detail, see section ‘After the wash’.

  1. Once cooled, unload dishes carefully
    For more detail, see section ‘After the wash

  1. Check condition of dishwasher, clean if necessary
 
  • Was this article helpful?