Skip to main content
Fisher & Paykel Product Help

Adjust Panel Height to Align the Cabinetry Gaps

Illustrates how to adjust panel height to align the cabinetry gaps.
adjustpanelheight.png

Insert an appropriately sized Philips screwdriver into the hole above the door pin and rotate the panel up or down to align the gaps in your cabinetry.

Repeat on the other side if necessary.

The panel has a maximum travel of 2 mm up or down.

Important-Icon.png

2017-07-28_1606.png Integrated models with remote control: Ensure that you maintain a minimum of 2 mm ventilation gap below the panel.

 Designer models and 2017-07-28_1613.png Integrated models with badge: Ensure that you maintain a minimum of 8 mm ventilation gap below the panel.