Parts Supplied
|
Drain Hose Support (1) |
Drain Hose Joiner (1) |
Wire Clip (1) (for securing Drain hose joiner) |
Clamp (1) (for securing Drain Hose joiner) |
Side Mounting Bracket Kit (A and B) (2) Optional |
Top Mounting Brackets (2) Optional |
|
Phillips 16mm Screws (7)
|
38 mm
|
Rubber Washer for Inlet Hose (1) (come already fitted) |
Moisture Protection Tape (1) (to prevent moisture damage to cabinetry)
|
||
If the Drain hoses supplied are not long enough to reach your services, you must use a Drain Hose Extension Kit P/N 525798 which will extend the drain hoses by 3.6 m. The kit is available from the nearest Fisher &
Dishdrawer™ Installation Overview
This video provides an overview of what is needed to install a DishDrawer™. It is intended as an overview only of the installation process and is not intended to be used
as a guide on how to install a DishDrawer™ yourself. https://vimeo.com/325297597