Skip to main content
Fisher & Paykel Product Help

Your remote control

 

To prevent unauthorized use, keep the remote control out of reach of children.

Signal indicator

  • A single flash indicates a successful signal to the dishwasher.
  • Multiple flashes indicate that the dishwasher cannot read the signal. The remote control may be out of range.

‘Battery low’ indicator

When this flashes, the battery needs to be replaced. Use a CR2032 battery, ensuring the + symbol faces up.

Control button(s)

See section ‘Operating instructions’ for information.

Mounting your remote

Your remote control comes supplied with a detachable mounting bracket and self adhesive strip. You can choose to affix this bracket on a nearby surface, which should be out of direct sunlight and away from excessive heat and steam. Do not apply on wallpaper.

 Doubles remote shown

Peel red liner off, press adhesive to bracket

Peel black liner off

Press remote & bracket to clean, dry surface for 10 seconds

Slide off remote, then press bracket firmly to surface for 30 seconds. Wait 1 hour before refitting remote.

  • Was this article helpful?