Skip to main content
Fisher & Paykel Product Help

Parts Supplied

Drain hose support (1)

Drain hose joiner (1)

Wire clip (1) (for securing Drain hose joiner)

Side mounting bracket kit
(A and B) (2) OPTIONAL

Clamp (1) (for securing Drain hose joiner)

Phillips 16 mm screws (7)

38 mm bottom fixing screws & metal washers (2)

Rubber washer for inlet hose (1) (comes already fitted)

Moisture protection tape (1) (to prevent moisture damage)

Cavity bracket kit (1) supplied with Tall height Designer and Integrated models only

If the Drain hose supplied is not long enough to reach your services, you must use a Drain Hose Extension Kit P/N 525798 which will extend the drain hose by 3.6m. The kit is available from the nearest Fisher & Paykel Authorised Service Centre or through our local website listed at the end of this document.

External Venting kit (1) 
 supplied with Integrated models with remote only 

Panel bracket (1) (attached to product)

Panel mounting screws (6)

Integrated rectangular badge (1) (Satin chrome supplied) 
 supplied with Integrated models with badge only

  • Was this article helpful?