Skip to main content
Fisher & Paykel Product Help

Not Spinning Properly

 

 

Possible Cause What to Do
Uneven surface

Your washer should be on a level surface to prevent it moving during a cycle. Adjust the feet if required – to ensure machine is correctly leveled refer to 'Installation Instructions' in your User Guide.

Suds build-up

Check the amount of detergent used, reduce if necessary.  Ensure a detergent designed for use in a front loader is used.

Drain hose – kinks Straighten any kinks along the hose that drains water from your washer. If the kinks return, you may need to replace the hose.
Wash load not balanced The wash load has gone out of balance during spin. If you want to improve the dryness of the load, open the door and manually redistribute the load. Remove items if necessary. Close the door and select the SPIN cycle, adjust the spin speed if necessary. Press START/PAUSE to start the washer.

Still Need Help?


You may need assistance from one of our qualified service technicians.
Click on the button below to schedule a visit.

or Contact Us

 

 

  • Was this article helpful?