Skip to main content
Fisher & Paykel Product Help

Attach Cavity Bracket - Tall Designer Models for 480mm Cavity

 

 

 

Important-Icon.png The enclosed cavity bracket is fitted before installation in order to conceal the gap at the top of the cavity left after installation.

Attach Cav Brack Tall Single.JPG

Ensure the cavity panel bracket is positioned so that the “F” arrow is pointing  towards the front of the chassis.

Firmly push the bracket so that the prongs engage with the top tabs and it clicks into place.

Attach Cav Brack Tall Single 2.JPG

Ensure the top trim seal is facing forward after attaching the bracket.

Important-Icon.png Ensure the prongs have not been driven down into the chassis as this will damage the lid below.

 

 

 

  • Was this article helpful?