Door Opening Rotation
|
115° DOOR OPENING (FULL ROTATION) |
90° DOOR OPENING |
For 90° door swing a hinge limiting pin is supplied with your refrigerator. This pin fits in the bore holes of the top hinge (refer to Z).
|
Door Opening And Clearance Dimensions |
RS9120WRU RS9120W(R/L)J mm |
|---|---|
| A. Depth of door (widest opening) measured from front of door | 940 |
| B. Depth of drawer (open) measured from front of drawer, including handle | 400 |
| C. Depth of drawer (open) measured from front of drawer, excluding handle | 360 |
| D. Minimum door clearance to adjacent wall* (115° – full internal access) | 410 |
| E. Minimum door clearance to adjacent wall* (90° – reduced internal access) | 110 |
* Measured from front cabinetry edge
- Before opening doors to the product, ensure the product is on its base packer and the polystyrene stability blocks are still in place. Failure to follow these instructions could lead to serious injury or death.
- Drawer must be closed when fitting hinge limiting pin.
- Open door to 90°.
- Align the hinge limiting bolt vertically with the bore hole.
- Insert the pin through the bore hole. Use a hammer to drive the pin through the hole.