Skip to main content
Fisher & Paykel Product Help

Cabinetry Dimensions

 

 

Cabinetry Dimensions (460mm HIGH Cavity)

Verify the minimum measurements required for correct installation of the appliance. The coffee maker must be installed in a column and the column must be firmly fixed to the wall with commercially available brackets.

  • All installation or maintenance operations must be performed with the appliance disconnected from the mains electricity supply.
  • Kitchen furniture in direct contact with the appliance must be heat resistant 65°C min.
  • To guarantee correct ventilation, leave a gap at the bottom of the cabinet (see measurements below).

 

Cab Dim_Side.PNG

SIDE

Cab Dim_Top.PNG

TOP

 

Cabinetry Dimensions

EB60 Models

mm

I. Minimum inside width of cavity 560
J. Overall width of cabinetry 600
K. Minimum inside height of cavity 450
L. Overall height of cabinetry 460
M. Minimum inside depth of cavity 545
N. Ventilation Air Gap 50

 

Cabinetry Dimensions (480mm CAVITY TRIM KIT)

Verify the minimum measurements required for correct installation of the appliance. The coffee maker must be installed in a column and the column must be firmly fixed to the wall with commercially available brackets.

  • All installation or maintenance operations must be performed with the appliance disconnected from the mains electricity supply.
  • Kitchen furniture in direct contact with the appliance must be heat resistant 65°C min.
  • To guarantee correct ventilation, leave a gap at the bottom of the cabinet (see measurements below).

 

Cab Dim 480mm_Side.PNG

SIDE

Cab Dim 480mm_Top.PNG

TOP

 

Cabinetry Dimensions

EB60 Models

mm

I. Minimum inside width of cavity 560
J. Overall width of cabinetry 600
K. Minimum inside height of cavity 470
L. Overall height of cabinetry 480
M. Minimum inside depth of cavity 545
N. Ventilation air vent 50
O. Height of trim kit 20

 

 

 

  • Was this article helpful?