|Possible Cause||What to Do|
|Drain hose(s) bent or kinked||Straighten any kinks along the hose that drains water from your DishDrawer™. If the kinks return, you may need to replace the hose.|
|Filter plate blocked||Clean the filter plate/drain filter. Aim to clean your DishDrawer™ at least once per month, including the drain filter plates. Refer to ’User Maintenance Instructions’ in your User Guide.|
Remove the rotor to scoop out whatever is in there and reassemble.
Please check the spigot (s pipe) drain holes have been drilled and clear.
Still Need Help?
You may need assistance from one of our qualified service technicians.
Click on the button below to schedule a visit.
or Contact Us