Skip to main content
Fisher & Paykel Product Help

Before You Do Your First Wash

 

You owe it to yourself and your Fisher & Paykel WashSmart to have it installed correctly by an Authorized Service Agent.

Before you Start, it is a Good Idea to go Through the Following Checklist:

  1. Has the base packer been removed?
  2. Is the drain hose threaded through the ‘U bend’ hose guide (with no more than 3/4 ” (20 mm) extended) and hooked on to your standpipe or tub/sink?
  3. Is the hot hose connected to the hot valve marked ‘H’?
    Is the cold hose connected to the cold valve marked ‘C’?
  4. Is the washer leveled correctly, with the feet extended and cabinet corners clear of the floor? Refer to pages 11 and 12.
  5. Have you performed the installation test cycle? Refer to page 13.
Screen Shot 2018-01-10 at 12.35.36 PM.png
WARNING! 
Electric Shock Hazard.png

Electric Shock Hazard

  • Read and follow the IMPORTANT SAFETY INSTRUCTIONS outlined in this User Guide before operating this appliance, pages 3 – 5.
  • Failure to do so can result in death, electric shock, fire or injury to persons.

 WashSmart™ Water Consumption

Load Size Regular*
22 lb (10 kg) 31 G (117 L)
15.5 lb (7 kg) 28 G (108 L)
11 lb (5 kg) 25 G (93 L)
7 lb (3 kg) 18 G (69 L)
2 lb (1 kg) 13 G (49 L)

*Regular cycle is the default wash cycle for WashSmart.

Water consumptions are based on the WashSmart default settings.

  • Was this article helpful?