Requirements for Installation
Requirements for Installation.
WARNING!
![]() |
Explosion Hazard
|
Minimum clearance for alcove or closet installation:
- Minimum clearance between dryer cabinet and adjacent walls or other surfaces is:
3/4” (20mm) sides, front, and top
1” (25.4mm) rear - Consideration must be given to provide adequate clearance for installation and service.
- Closet doors must be louvered or otherwise ventilated and have at least 60 square inches (387cm2) of open area. If the closet contains both a washer and a dryer, doors must contain a minimum of 120 square inches (774cm2) of open area.
Minimum clearance other than alcove or closet installation:
- Minimum clearance to combustible surfaces and for air opening are:
3/4” (20mm) sides and top
1” (25.4mm) rear - Consideration must be given to provide adequate clearance for installation and service.