Skip to main content
Fisher & Paykel Product Help

Draining While Filling

 

Possible Cause What to Do

Siphoning

When the end of the drain hose is lower than the water level inside your washer, water drains or ‘siphons’ as your washer fills. Check the drain hose is inserted into the standpipe by no more than 20mm. The standpipe should be 800-1200mm in height. Refer to your User Guide for further information.

Drain hose too Low Ensure the height of the drain hose is at least 800mm from the floor level refer to the Draining section of the 'Installation Instruction' of your User Guide.

Drain hose sitting in Water

If the end of the drain hose is leaking or sitting in water, it’s likely to be loose, so reinsert into the standpipe as per your User Guide.

 

Still Need Help?


You may need assistance from one of our qualified service technicians.
Click on the button below to schedule a visit.

or Contact Us