Water Dispenser Not Working (Ice & Water Models Only)
Possible Cause | What to Do |
---|---|
First use / New Install |
Air may be trapped in the line the first time you use it. Press dispenser for two minutes to remove trapped air and to fill the water system. |
Water supply – household |
Check the flow rate of water elsewhere in your household. If it is slow or there is no water, you may need to contact your water supplier. |
Water supply turned off or not connected |
|
Supply line may be blocked. On first installation there may be air trapped in water system. | Check supply for kinks or leaks. To remove air, run 3 - 4 litres (4 qt) of water through the dispenser. |
Filter may be blocked and need replacing | Replace filter cartridge, see ‘Water filter’ section in your User Guide. |
Dispenser lock turned on |
Press the water dispenser lock button |
Frozen water tank |
Try raising the temperature using the internal control panel at the front of the fridge section. |
Still Need Help?
You may need assistance from one of our qualified service technicians.
Click on the button below to schedule a visit.
or Contact Us