Skip to main content
Fisher & Paykel Product Help

There is No Clicking / Sparking

 

Possible Cause What to Do
Power Cut / Failure There is a power failure. You can still use your cooktop, but will need to matchlight  the burner(s). To do so, press down and turn the dial anticlockwise to High while holding a lighted match close to the side of the burner. Keep the dial held down for 3 seconds after the burner has lit, then release. Wait until the flame is burning evenly before adjusting it.
Ignitors dirty or wet The ignitor(s) may be dirty or wet. Clean them following the instructions in ‘Care & Cleaning’ section of your User Guide.

Still Need Help?


You may need assistance from one of our qualified service technicians.
Click on the button below to schedule a visit.

or Contact Us