DishDrawer™ 'E' Fault Code - Classic Models

Last updated
Save as PDF

Classic

Not sure on which model you have? Click here to Find where your Model Number is located.

Fault Code	Possible Cause	Display Classic
E1	Flood Detected This requires a Service Technician to assist - Click Here to schedule a visit.
E2	Motor Rotor Fault There may be debris or broken glass in the Rotor. try removing and cleaning, if this doesn't work then you will need a Service Technician to assist - Click Here to schedule a visit. Video: How to Check the Rotor in Your DishDrawer™
E3	Temperature Sensor Fault You may need to have a tempering valve installed on your water supply, to ensure that incoming water is less than 65oC (149oF).
E4	Heating Element Failed You will require a Service Technician to assist - Click Here to schedule a visit.
E5	Lid Motor Fault Reset and try again. There may have been a plate/glass that was too high for the drawer. If this does not work, you will require a Service Technician to assist - Click Here to schedule a visit.
E6	Fault with Drying Fan You will require a Service Technician to assist - Click Here to schedule a visit.
E7	Electronics Fault - Detergent Dispensing You will require a Service Technician to assist - Click Here to schedule a visit.
E8	Electronics Fault - Other Systems You will require a Service Technician to assist - Click Here to schedule a visit.
E9	Electronics Fault - Controller You will require a Service Technician to assist - Click Here to schedule a visit.
EC	Electronics Fault - Communication between Drawers You will require a Service Technician to assist - Click Here to schedule a visit.
FC	Electronics Fault - Communication between Drawers You will require a Service Technician to assist - Click Here to schedule a visit.

Still Need Help?

You may need assistance from one of our qualified service technicians.
Click on the button below to schedule a visit.