DW60 Dishwasher

Last updated
Save as PDF

Not sure on which model you have? Click here to Find where your Model Number is located.

Fault Code	Explanation
E1 or F1	Door alarm - check that the door is closed properly.
E2	Sensor alarm - You will require a Service Technician to assist - Click Here to schedule a visit.
E3 or F3	Drain hose fault, check the drain hose is connected correctly is not blocked Check the drain hose is not too low and siphoning out if all OK then you will require a Service Technician to assist - Click Here to schedule a visit.
E4 or F4	Drain fault, check the drain hose is not bent and installed correctly. Check the filter and ensure no blockage can be seen.
E5	No Water - Check the tap is on. Check the tap is on. Check the inlet hose is not bent. Check the drain hose is not bent. Check the spray arms are not blocked. If all OK, you will require a Service Technician to assist - Click Here to schedule a visit.
E6	Flood switch activated - get the customer to turn the water and power off to the product, you will require a Service Technician to assist - Click Here to schedule a visit.
E7	Communication error alarm - You will require a Service Technician to assist - Click Here to schedule a visit.
E8	Water level pressure switch alarm - You will require a Service Technician to assist - Click Here to schedule a visit.
E9	Diverter valve failure - You will require a Service Technician to assist - Click Here to schedule a visit.
EA	High water level alarm - You will require a Service Technician to assist - Click Here to schedule a visit.
ECO	Motor failure - You will require a Service Technician to assist - Click Here to schedule a visit.

Still Need Help?

You may need assistance from one of our qualified service technicians.
Click on the button below to schedule a visit.