DW60FC Dishwasher
- Last updated
- Save as PDF
Fault Code | Explanation |
---|---|
A10 | Water supply - check the tap is turned on. Check inlet filters are not blocked - if OK, you will require a Service Technician to assist - Click Here to schedule a visit. |
A11 |
Water supply issue - You will require a Service Technician to assist - Click Here to schedule a visit. |
A12 |
Water supply issue - You will require a Service Technician to assist - Click Here to schedule a visit. |
A20 | Draining issue - check drain hose is not bent or kinked. Check the drain hose is connected correctly to the plumbing and the spigot is correctly drilled out. |
Turbidity sensor - The turbidity sensor located in the sump may need cleaned - refer to the user guide for cleaning instructions. | |
F30 | Flood switch activated - get the customer to turn the water and power off to the product, you will require a Service Technician to assist - Click Here to schedule a visit. |
F40 |
Flowmeter error - get the customer to turn the product off and back on at the wall, if the fault code persists, you will require a Service Technician to assist - Click Here to schedule a visit. |
F50 |
Electronics error - get the customer to turn the product off and back on at the wall, if the fault code persists, you will require a Service Technician to assist - Click Here to schedule a visit. |
F60 |
Water temperature issue - get the customer to turn the product off and bock on at the wall, if the fault persist, you will require a Service Technician to assist - Click Here to schedule a visit. |
F90 | Data/electronics error - get the customer to turn the product off and back on at the wall, if the fault code persists, you will require a Service Technician to assist - Click Here to schedule a visit. |
FA0 | Electronics/power supply error - get the customer to turn the product off and back on at the wall, if the fault persists, you will require a Service Technician to assist - Click Here to schedule a visit. |
AD0 | Door lock error - check the door is closing correctly, get the customer to turn the product off and back on at the wall, if the problem persists, you will require a Service Technician to assist - Click Here to schedule a visit. |
FC0 | Motor fault - switch the product off and back on at the wall, if the problem persists, you will require a Service Technician to assist - Click Here to schedule a visit. |
AE0 | Diverter - switch the product off and back on at the wall, if the problem persists, you will require a Service Technician to assist - Click Here to schedule a visit. |
Still Need Help?
You may need assistance from one of our qualified service technicians.
Click on the button below to schedule a visit.
or Contact Us