Skip to main content
Fisher & Paykel Product Help

Changing Pre-Set Options

Changing Pre-Set Options

Option Adjustment Mode

In this mode you can modify the number of beeps that sound at the end of the cycle (ie end of cycle (EOC) beeps), and reset the dryer to the settings it left the factory with (factory reset).

DRYNESS LEVEL and DRYING TEMP settings cannot be modified.

To Enter Option Adjustment Mode

  1. Turn the machine on at the wall but do not touch the POWER button.
  2. Touch and hold the KEYLOCK and START/PAUSE buttons for three seconds. You will hear three quick beeps indicating you have entered Option Adjustment mode . The diagram below shows how the drying cycle icons relate to the options you can change (Fig.55).
  3. Use the dial and buttons on the control panel to make your changes to the pre-set options.
  4. Touch POWER to return to normal mode when you have finished modifying your options. Your dryer will automatically remember your changes.

Adjusting Your Options

  1. Enter the Option Adjustment mode (refer above).
  2. The diagram below shows how the drying cycle icons relate to the options you can change. The two options (the number of end of cycle beeps, and resetting the factory defaults) you can adjust are accessible using the HEAVY and DELICATE cycles.
  3. Use the MORE Screen Shot 2018-01-11 at 9.01.30 AM.png (and where available) LESS Screen Shot 2018-01-11 at 9.01.07 AM.png buttons underneath the digital display to scroll through the available settings of your selected option.

D48.JPG

Fig.55 Option Adjustment mode

End of Cycle Beeps

The beeps signalling the end of the cycle can be set to O (no beeps), 5 beeps or 15 beeps. The default setting is 5 beeps.

To Modify the Number of Beeps Sounding at the End of the Cycle:

  1. Enter Option Adjustment mode (refer to Option Adjustment Mode section above).
  2. Select the HEAVY cycle.
  3. Touch the MORE Screen Shot 2018-01-11 at 9.01.30 AM.png (or where available) LESS Screen Shot 2018-01-11 at 9.01.07 AM.png buttons to increase the number of beeps, or for no beeps to sound at the end of the cycle.
  4. Touch POWER to save your settings.

D46.JPG

Fig.56 Adjusting the end of cycle beeps

Factory Reset

You can reset your dryer to the default settings it left the factory with.

To Reset Your Dryer to it's Factory Settings:

  1. Enter Option Adjustment mode (refer to Option Adjustment Mode section above).
  2. Select the DELICATE cycle.
  3. The display will show “rSt”. Touch and hold the START/PAUSE button for three seconds to reset your dryer to its factory settings.
This action will reset the dryer to the default settings, exit Option Adjustment mode and power off your washer.

Touch POWER to exit if you do not wish to reset your dryer.

D49.JPG

Fig.57 Resetting back to the factory settings

Remember, to save changes and exit from the Option Adjustment Mode at any time (ie return to normal operating mode), touch the POWER button.

  • Was this article helpful?