Skip to main content
Fisher & Paykel Product Help

Attach Side Base Brackets and Installation Aiders

 

IMPORTANT!

  • Take care when working with the appliance outside of the finished enclosure, as the appliance is not secured and has the possibility of tipping forward.
  • Installation aiders can only be used when door panels and surrounding cabinetry panels are the same thickness.  
  1. Ensure all external packaging material is removed from the appliance before installation.

  2. At the base LH side of the appliance attach the LH side bracket to the dedicated threaded holes and secure with screws x2 (M5 x 8 countersunk Phillips screws). Repeat this process on the RH side of the appliance.

    Repeat this process on the RH side of the appliance.
    Screen Shot 2018-01-08 at 6.29.18 AM.png

  1. The installation aiders supplied are used to determine how far the appliance needs to be positioned into the finished enclosure, to be flush with surrounding cabinetry.

    Each aider has a set of dimension tabs designed for the different door panel thickness (refer to A). Select the tabs which are most suitable to your door panel thickness and break off all other unwanted tabs.

    Repeat this process for the remaining aiders.
Screen Shot 2018-01-08 at 6.29.55 AM.png
Break off unwanted tabs
  1. Carefully open one refrigerator door ensuring the appliance does not tip forward. place the aider onto the side of the appliance, use the locating boss to determine the aider's position and secure with screws x2 (m5 x 8 countersunk Phillips screws)

    Repeat this process for the remaining aiders.
    fix1.png