Skip to main content
Fisher & Paykel Product Help

Product and Cavity Dimensions (all models)

 

Screen Shot 2018-01-05 at 3.37.07 PM.png

Cavity Dimensions Inches (mm)
A. Overall height of cavity 72” (1829)
B. Overall width of cavity
(when adjoining cabinetry cannot share 5/32” (4 mm) door gap)
36” (914)
C. Overall depth of cavity 25” (635)

Total front panel width with required gaps at sides = 36” (914 mm). (Refer to custom door panel dimensions section – panel width + 2 x F cabinetry gaps).

* Assumes a door panel thickness of ” (19 mm).

RS36A72J model shown only.
When designing custom door panels, with non-Water dispensing models.

 

2018-01-08_1113.png 

Product Dimensions Inches (mm)
D. Overall height of product* 71 27/32” (1825)
E. Overall width of product 35 1/32” (890)
F. Minimum cabinetry gap clearance from edge of custom panels** 5/32” (4)
G. Overall depth of product (excluding front door panels) 23 3/4” (603)
H. Depth of toe kick (measured from front of door panels***) 2” (51)
I. Height of grille/toe kick* 4” (102)
J. Depth of product front panels (excludes handles)***  5/8"  – 3/4 ” (16 – 19)

* Includes mounted feet.
** Refer to custom door panel dimensions section.
*** Door panels to be manufactured and fitted by cabinetmaker, min.  ” (16 mm) - max.  ” (19 mm) thickness.

2018-01-08_1107.png

Door Clearance Dimensions Inches (mm)
A. Depth of door (widest opening) measured from front of cabinetry 17 5/16” (440)
B. Depth of drawer (open) measured from front of cabinetry* 15  3/4” (400)
C. Minimum door clearance** to adjacent wall (115° – full internal access)* 11 13/16” (300)
D. Minimum door clearance** to adjacent wall (90° – reduced internal access)* 3 13/16” (100)

* Does not include the custom door panels or handles to be manufactured and fitted by cabinetmaker
** Measured from front cabinetry edge

Product and Cavity Dimensions - with RD3672 Door Panel Set


Screen Shot 2018-01-05 at 4.08.28 PM.png

Cavity Dimensions Inches (mm)
A. Overall height of cavity 72” (1829)
B. Overall width of cavity
(when adjoining cabinetry cannot share 5/32” (4 mm) door gap)
36” (914)
C. Overall depth of cavity 25” (635)

Total front panel width with required gaps at sides = 36” (914 mm) ( E product width + 2 x F cabinetry gaps).
Height of front panels with required gap above = D product height + F cabinetry gap.

2018-01-08_1113.png

Product Dimensions Inches (mm)
D. Overall height of product* 71 27/32” (1825)
E. Overall width of product 35 21/32” (906)
F. Minimum cabinetry gap clearance from edge of product 5/32” (4)
G. Overall depth of product (excluding front door panels) 23  3/4” (603)
H. Depth of toe kick (measured from front of door panels) 2” (51)
I. Height of toe kick** 4” (102)
J. Height of bottom drawer panel 23 15/32” (596)
K. Height of top door panels 44 7/32” (1123)
L. Depth of product front panels (excludes handles)*** 3/4” (19)

* Includes mounted feet. EIH
** Optional EZKleen stainless steel front panels - Model no. RD3672 (non-Water dispensing model) and model no. RD3672U (Ice & Water model).

RS36A72J model shown with RD3672 door panel set.

Product and Cavity Dimensions - with RD3672/RD3672U Door Panel Set

2018-01-08_1107.png

Door Clearance Dimensions Inches (mm)
A. Depth of door (widest opening) measured from front of door 17 5/16” (440)
B. Depth of drawer (open) measured from front of drawer, including handle 15 3/4” (400)
C. Depth of drawer (open) measured from front of drawer, excluding handle 14 3/16” (360)
D. Minimum door clearance* to adjacent wall (115° – full internal access) 11 13/16” (300)
E. Minimum door clearance* to adjacent wall (90° – reduced internal access) 3 13/16” (100)

* Measured from front cabinetry edge.

  • Was this article helpful?