Skip to main content
Fisher & Paykel Product Help

Attach Side Trim Brackets


Frameless cabinetry installation
(opened cabinetry doors)

  1. Break off the datum lip to each side trim bracket and discard.

    Repeat for all side trim brackets.
    Screen Shot 2018-01-08 at 9.03.26 AM.png

  2. Position three side trim brackets on each side (refer to A for bracket locations). Open the appliance doors. Measure 2” (50 mm) from the front face of the appliance (from behind the doors), to the front of the alcove and accurately mark a vertical line (refer to B).

    Align the bracket edge with the marked line and using screws x2 (#8 x 16 mush washer) fix the bracket to the cabinetry x3.

    Repeat on the opposite side.


  • Was this article helpful?