RS36A80J model shown only.
When designing custom door panels, these are only available for non-Water dispensing models.
|A. Height of top door panel||
min. 45 9/32 – max. 49 9/32”
(min. 1150 – max. 1252)
|B. Width of top door panel||17 3/4” (451)|
|C. gap between top door panel||5/32” (4)|
|D. Height of bottom drawer panel*||28 13/32 – 30 13/32” (722 – 772)|
|E. Height from bottom of product to top of bottom drawer panel||34 13/32” (874)|
|F. Width of bottom drawer panel||35 21/32” (906)|
|G. Gap between top door panels and bottom drawer panel||5/32” (4)|
|H. Height of toe kick panel*||4 – 6” (101 – 152)|
|I. Maximum depth of custom panels||min. 5/8 - 3/4 ” (min 16 -19)|
|Maximum weight of an individual top door panel**||22 pounds (10 kg)|
|Maximum weight of bottom drawer panel**||24 1/4 pounds (11 kg)|
Custom door panels to be manufactured and fitted by cabinetmaker.
Toe kick can be manufactured by cabinetmaker or stainless toe kick can be used.
Door handles available as a separate accessory.
* The bottom grille can be reduced to allow for a higher toe kick. Adjust the height of the bottom drawer panel accordingly.
** Includes weight of handle.
The drawings below apply to non-Water dispensing models only (RS36A80J). Dimensions are shown in Imperial (inches) and apply for the preparation and installation of custom door panels.
For Dwg and Dxf files of the below panel preparation download the folder on http://thekitchentools.fisherpaykel.com