Skip to main content
Fisher & Paykel Product Help

Top Trim and Hinge End Caps

 

1. Secure the top trim to the ceiling of the enclosure with screw x1 (#8 x 16 mush washer screw).

Repeat this process on the opposite side.

2018-01-08_1401.png

2. Replace the left hinge end cap. Align hinge cap to the product, press and firmly slide the cap to the right (refer to A).

Hold onto the corner of the end cap, firmly push up and to the left to engage securing hook. Ensure cap is flush with the product.

3. Replace right hinge end cap. Align hinge cap to product, press and firmly slide the cap to the left (refer to B). Ensure cap is flush with the product.

2018-01-08_14011.png

 

  • Was this article helpful?