Skip to main content
Fisher & Paykel Product Help

Custom Door Panel Dimensions

 

Custom Door Panel Dimensions.PNG

RS36W80RJ or RS36W80RJC models shown only.
When designing custom door panels, these are only available for non-Water dispensing models.

RS36W80J,
RS36W80JC
Custom Panel Dimensions Inches (mm)
A. Height of top door panel 45 5/16 – 49 5/16” (1150 – 1252)
B. Width of top door and bottom drawer panel 35 11/16” (906)
C. Height of bottom drawer panel* 28 3/8 – 30 3/8” (722 – 772)
D. Height from bottom of product to top of bottom drawer panel 34 3/8” (874)
E. Gap between top door panel and bottom drawer panel 5/32” (4)
F. Height of toe kick panel* 4 – 6” (102 – 152)
G. Depth of custom panels min. 5/8, max. 3/4” (min. 16, max. 19)
Maximum weight of top door panel** 44 lbs (20kg)
Maximum weight of bottom drawer panel** 24 1/4 lbs (11kg)

Custom door panels to be manufactured and fitted by cabinetmaker.
Door handle kit is available as an optional accessory.


* Stainless steel toe kick, height 4” (102mm) is supplied with the appliance. For integrated installation, a custom toe kick 4 – 6”
(102 – 152mm) can be manufactured and fitted by cabinetmaker. The bottom grille can be reduced to allow for a higher toe kick.
Adjust the height of the bottom drawer panel accordingly.
** Includes weight of handle.

 

The drawings below apply to non-Water dispensing models only (RS36W80(R/L)J/RS36W80(R/L)JC). Dimensions apply for the preparation and installation of custom door panels.
For Dwg and Dxf files of the below panel preparation download the folder on http://thekitchentools.fisherpaykel.com or http://www.dcsappliances.com/designers-architects/

Custom Door Panel Dimensions - Top Panel rear.PNG

Top Panel - Rear View

Custom Door Panel Dimensions - Bottom Panel rear.PNG

Bottom Panel - Rear View

 

  • Was this article helpful?