Skip to main content
Fisher & Paykel Product Help

Product and Cavity Dimensions

 

Product & Cavity Dimensions - Front View.PNG

Front View

Product & Cavity Dimensions - Profile View.PNG

Profile View

 

Cavity Dimensions Inches (mm)
A. Overall height of cavity 80 – 84” (2032 – 2134)
B. Overall width of cavity 36” (914)
C. Overall depth of cavity* 24 3/4” (629)

Total front panel width with required gaps at sides = 36” (914 mm). (Refer to ‘Custom door panel dimensions’ section – panel width + 2 x F cabinetry gaps).
* Assumes a door panel thickness of 3/4” (19 mm).

RS36W80RJ or RS36W80RJC DCS models shown only.
When designing custom door panels, these are only available for non-Water dispensing models.

 

Product & Cavity Dimensions - Custom Panel.PNG

Shown with custom panel and handles attached to fridge

 

Product & Cavity Dimensions - Plan View.PNG

Plan View

Product Dimensions Inches (mm)
D. Overall height of product* (does not include front panels) 79 7/8” (2028)
E. Overall width of product (does not include front panels) 35 1/16” (890)
F. Minimum cabinetry gap clearance from edge of custom panels** 5/32” (4)
G. Overall depth of product (excl. front door panels) 23 3/4” (603)
H. Depth of toe kick (measured from front of door panels***) 4 3/4” (120)
I. Height of stainless steel toe kick**** 4” (102)
J. Depth of product front panels (excludes handles)*** 3/4” (19)

* Includes mounted feet.
** Refer to ‘Custom door panel dimensions’ section.
*** Door panels to be manufactured and fitted by cabinetmaker, maximum thickness 3/4” (19 mm).
**** Stainless steel toe kick provided with appliance. Alternatively customers can supply their own toe kick, height 4 – 6” (102 – 152 mm).

 

Product & Cavity Dimensions - 115 Door Opening.PNG

115° Door Opening (Full Rotation)

Product & Cavity Dimensions - 90 Door Opening.PNG

90° Door Opening

For 90° door swing a hinge limiting pin is supplied with your appliance. This pin fits in the bore holes of the top hinge (refer to Z).

  1. Open door to 90°.
  2. Using a hammer, drive the hinge limiting pin through the bore holes which are now vertically aligned.
  • Before opening doors to the product, ensure the product is on its base packer and the polystyrene stability blocks are still in place. Failure to follow these instructions could lead to serious injury or death.
  • Drawer must be closed when fitting hinge limiting pin.
Door Opening and Clearance Dimensions Inches (mm)
A. Depth of door (widest opening) measured from front of door 37” (940)
B. Depth of drawer (open) measured from front of cabinetry* 14 3/16” (360)
C. Minimum door clearance** to adjacent wall* (115° – full internal access) 16 1/8” (410)
D. Minimum door clearance** to adjacent wall* (90° – reduced internal access) 4 3/8” (110)

 * Does not include the custom door panels or handles to be manufactured and fitted by cabinetmaker.
** Measured from front cabinetry edge.

 

Product & Cavity Dimensions - with RD3680 or RD3680C Door Panel Set

Product & Cavity Dimensions - RD3680...Front View.PNG

Front View

Product & Cavity Dimensions - RD3680...Profile View.PNG

Profile View

Cavity Dimensions Inches (mm)
A. Overall height of cavity 80” (2032)
B. Overall width of cavity 36” (914)
C. Overall depth of cavity 24 3/4” (629)

Total front panel width with required gaps at sides = 36” (914mm) ( E product width + 2 x F cabinetry gaps).
Height of front panels with required gap above = 80” (2032mm) ( D product height + F cabinetry gap).

 

Product & Cavity Dimensions - RD3680...Custom Panel.PNG

Product & Cavity Dimensions - RD3680...Plan View.PNG

Plan View

 

Product Dimensions Inches (mm)
D. Overall height of product* 79 7/8” (2028)
E. Overall width of product 35 11/16” (906)
F. Minimum cabinetry gap clearance from edge of product 5/32” (4)
G. Overall depth of product (excl. front door panels) 23 3/4” (603)
H. Depth of stainless steel toe kick (measured from front of door panels) 4 3/4” (120)
I. Height of stainless steel toe kick** 4” (102)
J. Height of bottom drawer panel 30 3/8” (772)
K. Height of top door panel 45 5/16” (1150)
L. Depth of product front panels (excludes handles)*** 3/4” (19)

* Includes mounted feet.
** Alternatively customers can supply their own toe kick, height 4 – 6” (102 – 152mm).
*** Optional Fisher & Paykel EZKleen stainless steel or DCS stainless steel front panels - Model no. RD3680(R/L) or RD3680(R/L)C (non-Water dispensing model) and model no. RD3680RU or RD3680RUC (Ice & Water model).

RS36W80RJ or RS36W80RJC models shown with RD3680 or RD3680RC door panels.

 Product & Cavity Dimensions - with RD3684 and RD3684C Door Panel Set

Product & Cavity Dimensions - RD3684...Front View.PNG

Front View

Product & Cavity Dimensions - RD3684...Profile View.PNG

Profile View

Cavity Dimensions Inches (mm)
A. Overall height of cavity 84” (2134)
B. Overall width of cavity 36” (914)
C. Overall depth of cavity 24 3/4” (629)

Total front panel width with required gaps at sides = 36” (914 mm) ( E product width + 2 x F cabinetry gaps).
Height of front panels with required gap above = 84” (2134 mm) ( D product height + F cabinetry gap).

RS36W80RJ or RS36W80RJC models shown with RD3684R or RD3684RC door panels.

Product & Cavity Dimensions - RD3684...Custom Panel.PNG

 

Product & Cavity Dimensions - RD3684...Plan View.PNG

Plan View

 

Product Dimensions Inches (mm)
D. Overall height of product* 83 7/8” (2130)
E. Overall width of product 35 11/16” (906)
F. Minimum cabinetry gap clearance from edge of product 5/32” (4)
G. Overall depth of product (excl. front door panels) 23 3/4” (603)
H. Depth of stainless steel toe kick (measured from front of door panels) 4 3/4” (120)
I. Height of stainless steel toe kick** 4” (102)
J. Height of bottom drawer panel 30 3/8” (772)
K. Height of top door panel 49 5/16” (1252)
L. Depth of product front panels (excludes handles)*** 3/4” (19)

* Includes mounted feet.
** Alternatively customers can supply their own toe kick, height 4 – 6” (102 – 152mm).
*** Optional Fisher & Paykel EZKleen stainless steel or DCS stainless steel front panels - Model no. RD3684(R/L) or RD3684(R/L)C (non-Water dispensing model) and model no. RD3684RU or RD3684RUC (Ice & Water model).

 

Product and Cavity Dimensions - with RD3680/RD3684 Door Panel Set

Product & Cavity Dimensions - 115 Door Opening RD3680&3684.PNG

115° Door Opening (Full Rotation)

Product & Cavity Dimensions - 90 Door Opening RD3680&3684.PNG

90° Door Opening

For 90° door swing a hinge limiting pin is supplied with your appliance. This pin fits in the bore holes of the top hinge (refer to Z).

  • Before opening doors to the product, ensure the product is on its base packer and the polystyrene stability blocks are still in place. Failure to follow these instructions could lead to serious injury or death.
  • Drawer must be closed when fitting hinge limiting pin.

 

  1. Open door to 90°.
  2. Using a hammer, drive the hinge limiting pin through the boreholes which are now vertically aligned.
  RS36W80RUC, RS36W80(R/L)JC RS36W80RU, RS36W80(R/L)J
Door Opening and Clearance Dimensions Inches (mm) Inches (mm)
A. Depth of door (widest opening) measured from front of door 37” (940) 37” (940)
B. Depth of drawer (open) measured from front of drawer, including handle 16 1/2” (420) 15 3/4” (400)
C. Depth of drawer (open) measured from front of drawer, excluding handle 14 3/16” (360) 14 3/16” (360)
D. Minimum door clearance to adjacent wall* (115° – full internal access) 16 15/16” (430) 16 1/8” (410)
E. Minimum door clearance to adjacent wall* (90° – reduced internal access) 5 1/8” (130) 4 3/8” (110)

* Measured from front cabinetry edge.

 

  • Was this article helpful?