Skip to main content
Fisher & Paykel Product Help

Attach Covers and Toe Kick

 

The standard appliance includes a stainless steel toe kick (4” (102 mm)) and the hardware required to mount the toe kick (4” (102 mm)). Alternatively the customer can supply their own toe kick (4 – 6” (102 – 152 mm)) for complete integration of the appliance.

  1. If applicable, remove any remaining protective film on your door panels.
  2. Open the refrigerator door, firmly push top cover over the top studs.

    Repeat this process for the freezer drawer.

fixed100.png
  1. Open the refrigerator door, firmly push side cover over the side studs.

    Repeat this process for the freezer drawer.

fixed101.png

4. Installing toe kick

Unscrew the toe kick bracket screws mid-way, and bring forward (refer to A and B).

Repeat this process on the opposite side.


Screen Shot 2018-01-09 at 2.40.55 PM.png
  1. Place toe kick in front of the brackets and gently push towards the appliance until flush with surrounding cabinetry. Once satisfied, remove the toe kick.
  2. Tighten the toe kick bracket screws to lock brackets into position and remove the backing from the Velcro strip (refer to C). Attach toe kick to the adhesive surface.

Screen Shot 2018-01-09 at 2.41.39 PM.png
  • Was this article helpful?