Safety requires refrigerators be stable when door and/or drawer, are open. The anti-tip bracket and fittings supplied must be fitted to the wall of the finished enclosure to withstand a 220.5lb (100 kg) load. This will prevent the possibility of the appliance tipping forward, when door and/or drawer, are open.
Failure to follow instructions can lead to serious injury or death.
When fastening with masonry plugs and/or screws:
- Ensure the screws avoid electrical, gas and water conduits.
- Ensure the surface the bracket is fastened to withstands a 220.5lb (100kg) load.
- Ensure light-weight masonry material such as cinder block and new concrete (no curing time) are not used in installation.
- Do not use metallic materials that may corrode, stain and/or damage the enclosure.
For 80” (2032mm) cavity installation
Wooden/Plaster Board Wall installation
Solid Wall installation
If a minimum 2 3/8” (60 mm) overlap cannot be achieved we recommend fastening a solid spacer (wooden beam etc) behind the bracket.