Ice and Water Initiation

Ice Maker Initiation

Water Dispenser Initiation

(Ice & Water Models Only)

To Initiate Ice Maker Before Use:

• When the appliance is first turned on after installation, the ice maker will be off.
• To activate the automatic ice maker, press the ‘Ice On/Off’ button once. The LED light above the button will illuminate indicating the ice maker is on.
• Press and hold the , - and + together for 4 seconds then close the doors. The ice tray will flip twice and empty the water into the bin below. The ice tray will flip only after the doors are closed.
• Force another cycle, this step helps remove any manufacturing and transportation dust in the ice tray.
• Empty the water and correctly replace the bin, ensuring the scoop is located at the front of the bin.
• Once the ice maker is in operation, discard the first 24 hours of ice. This will flush away any impurities in the water line.

For more information on making ice please refer to the User Guide supplied with
this appliance.

To Flush the Water Filtration System Before use:

• Press the water dispenser pad until water dispenses, this will displace trapped air in the water tank and filter system. This will take at least 2 minutes. Once the water has dispensed, rest the dispenser for 2 minutes.
• Dispense and discard 4qt (4L) of water, then rest the dispenser pad for a further 2 minutes.
• Dispense and discard a further 4qt (4L) of water. Failure to do this will result in excessive dripping from the dispenser.
• Once installation is complete, a few drips may appear out of the dispenser over the next few days to clear the remaining trapped air.
• Ensure the refrigerator has cooled for at least 2 hours before use.

Water Dispenser