Skip to main content
Fisher & Paykel Product Help



If there is a problem with your appliance, please check the following points before contacting your local Fisher & Paykel Authorized Service Agent or the Customer Care Center. 

All Models

Problem Possible Causes What to Do
Appliance does not operate. No electricity at power outlet. Check that the plug is correctly connected and power switched on.
Check another appliance at the same outlet.
Check house fuse.
Light not working. Light not functioning. The LED light cannot be serviced by the user. Contact your Fisher & Paykel Dealer or Fisher & Paykel Authorized Service Agent.
Refrigerator not working. Check refrigerator is turned on at wall.
Light and display not working. Product in ‘Sabbath Mode’. Press and hold Sabbath Image.PNG, and Bell image.PNG together
for 4 seconds.
Motor operates for long periods. Hot weather. Minimize door openings to allow temperature to stabilize.
Frequent door openings.
Large amount of food recently added.
Temperature control set too low.  Refer to section ‘Temperature control’.
Doors not sealing properly. Check that cabinet is level and gasket seals are clean.
Storage compartments too warm. Temperature setting not correct. Refer to section ‘Temperature control’.
Frequent door openings. Minimize door openings to allow temperature to stabilize.
Large amount of food recently added.
Food freezing in the refrigerator. Temperature setting not correct. Refer to section ‘Temperature control’.
Food placed directly in front of air outlets. Move chill sensitive foods away from the center back of the shelves.
Unfamiliar noises. Cabinet not stable or level. Refer to sections ‘Installation instructions’ or ‘ActiveSmart™ user warnings and sounds’.
Freezer is defrosting.
Water in the vegetable bins. Condensation is formed by
the water produced by fruit
and vegetables.
A small amount of condensation is beneficial for fruit and vegetable storage.
Wipe out water with a cloth.
Set humidity slide to Humidity Image.PNG low humidity setting
Exterior of cabinet is warm. This is normal.
Warm area on central door seal (French door models only). This is normal.
Condensation on outside of refrigerator/ freezer. Not unusual during periods of high humidity. Wipe dry.
Condensation inside fresh food compartment. Frequent or long door openings. Minimize door openings.
Door gasket leaking. Check that gasket is sitting flat and sealing tightly.
Not unusual during periods of high humidity. Wipe dry.
Door handles out of alignment. With time and usage, movement may occur. Refer to section ‘Installation instructions’.
Tray/bin does not slide in and out evenly. Packaging trapped. Check to ensure no food or packaging is trapped behind the tray/bin.
Runners not extending fully. Holding onto sides of tray/bin, extend the runners fully by using a firm pull – this will reset the runner.
Taste of odor in ice cubes Transfer of odor/taste from strong smelling foods.  Wrap or cover strong smelling foods.
Appliance operating inefficiently Accumulation of dust on or behind the rear compartment cover.

Refer to section ‘Cleaning and caring
for your refrigerator’.

If problem persists please contact
Customer Care.

Ice & Water Models Only

Automatic ice maker does not work. Ice maker has not been turned on. Switch on ice maker.
Bin is in the wrong way or there is no bin in place. Place bin so scoop is on the right side.
Ice bin sits directly under ice maker on top left side of freezer.
Water supply turned off or not connected. Connect water supply.
Freezer compartment not working. Contact Customer Care.
Water pressure too low. Check water pressure.
Water line kinked/squashed. Check water line for kinks/squashing.
Filter clogged. Water filter may need replacing.
Ice cubes have odor/taste. Unsealed packages may be transmitting odor/taste. Old cubes need to be discarded.
Ensure food packaging is sealed.
Interior of freezer needs cleaning. Ice storage bin needs to be emptied and washed.
Clean refrigerator.
Poor taste from incoming water. Filter may need changing.
A new filter may need to be installed.
Force 2 – 3 ice tray flips.
Slow ice cube freezing. Door may have been left ajar. Close door.
Freezer compartment too warm. Turn temperature to a colder setting.
Warm spot on central door seal. (French door models only) You may feel a warm spot at times on the central seal between the two refrigerator doors. This is perfectly normal and is part of the normal refrigerator operation.
Wet ice/ ice clumping. Low water pressure. Check water pressure.
Filter blocked. Replace filter.
Long freezer door openings. Gently tap ice with scoop to
unstick or, if large clumps occur,
empty ice bin and make new ice.
High ambient temperature.
Ice bin left out of freezer compartment for a length of
Ice will stick together over time.
Water has poor taste/odor. Refrigerator not used for an extended period. Dispense 10 qt (10 L) of water so fresh water supply is replenished.
Water dispenser does not work. Water supply turned off or not connected Turn water on.
Press dispenser for 2 minutes to remove trapped air from water line and to fill the water system.
Supply line may be blocked. Check supply for kinks or leaks.
On first installation there may be air in water system. To remove air, run 3 qt (3 L) of water through the dispenser.
Filter may be blocked and need replacing. Replace filter (see back of this booklet for Customer Care contact details).
‘Dispenser Lock’ activated. Press and hold the Disp key lock.PNG button for 4 seconds.
Water frozen in tank. Increase temperature to a warmer setting in fresh food compartment and freezer.
Water in first glass is warm. Water dispenser not used for extended period. Discard first glass of water dispensed.
Tank capacity used recently. Allow water time to cool.
Filter warning light 2018-01-10_1114.png is flashing. Filter needs replacing. Replace filter as soon as possible.
Drips overflow drip-shelf. Air trapped in tank. Flush 3 qt (3 L) water through dispenser, stopping intermittently.
New filter installed. Flush 10 qt (10 L) water through filter and then 3 qt (3 L) through dispenser.
Water flow rate has slowed down. Filter cartridge is restricted. Replace filter as soon as possible.
Ice buildup inside freezer compartment. Freezer door not closing tightly. Arrange items in freezer so door can close tightly.
Check and clean door gasket seal.
Ice maker makes unfamiliar sounds or seems too loud. Normal ice maker operation. Refer to section ‘ActiveSmart™ user warning and sounds’.
Ice boost function not increasing rate of ice production. Ambient temperature very warm. Minimize door openings.
Refrigerator is in high usage.
  • Was this article helpful?