Skip to main content
Fisher & Paykel Product Help

Cleaning and Maintenance

 

  • Unplug or disconnect the appliance from the power supply before servicing or cleaning.

  • When replacing the bulb, let the bulb cool, and assure that power to the ventilation hood has been turned off. Use new bulbs according to that indicated on the ventilation hood nameplate.

  • Never use abrasive or oil based cleaners

  • Wear gloves to protect against sharp edges

Maintenance

The ventilation hood should be cleaned regularly using a mild, liquid detergent and a clean soft cloth to avoid a build-up of grease occurring. Avoid the use of corrosive chemicals, abrasive cleaning products, hard brushes and steel wool pads. Grease deposits are corrosive which can cause damage to your ventilation hood.

In areas of high humidity or coastal environments, cleaning should be carried out more frequently.

Aluminium filters

  • Depending on use, and at least once a month, the aluminium grease filters should be removed and cleaned with hot soapy water or in a dishwasher.
  • If washed in a dishwasher, the filters should be placed in an upright position to prevent food from falling on them.
  • After rinsing and drying, replace the filters.

Some discoloration of the frames may occur.

Removing the aluminium filters:

  1. Open the stainless steel panel.

  2. Pull the relative filter catch, tilting it downwards until it disengages from the supports.

  3. Reverse these instructions when refitting the filters.


Screen Shot 2018-01-03 at 4.11.21 PM.png

 Light bulb replacement

When replacing the bulb, let the bulb cool, and assure that power to the ventilation hood has been turned off. Use new bulbs according to that indicated on the ventilation hood nameplate.

Replacement bulbs are not covered by warranty. Replacement bulbs are not covered by warranty.

  1. Open the stainless steel panel.

  2. Remove the aluminum filters.

  3. Unscrew the light bulb.

  4. Insert the replacement bulb into the lamp socket.

  5. Replace the aluminium filters.

  6. Close the stainless steel panel.


fixed4_480.png

 

  • Was this article helpful?