Skip to main content
Fisher & Paykel Product Help

Using Your Oven

 

Before Using your New Oven, Please:

  1. Read this user guide, taking special note of the ‘Safety and warnings’ section.

  2. Remove all accessories and packaging. Peel the protective film off all surfaces and accessories.

  3. Set the clock. The oven will not work until the clock has been set. See ‘To set the clock’.

  4. Slide in the shelves you will need, making sure that:

    • They are between the two wires of a shelf position;

    • The stop notches point down.

    • The bigger guard rail is at the back.

  5. Heat the oven on maximum for:

    • 60 minutes in the 2018-01-09_11454.png position

    • 30 minutes in the 2018-01-09_1145.png position

    • 15 minutes in the 2018-01-09_11455.png position

    • There will be a distinctive smell while you are conditioning your oven. This is normal, but make sure your kitchen is well ventilated during the conditioning.

  6. Once cooled, wipe out the oven with a damp cloth and mild detergent, and dry thoroughly.

2018-01-11_12053.png
Correct position of shelves


2018-01-11_1331.png
Function and temperature dials

2018-01-11_13311.png
2018-01-11_13312.png

1. Select a function

Rotate the function dial to select a function

  • The function indicator light will come on.
  • The preset function temperature will flash in the display. (Each cooking function has a preset temperature).

If you wish to use the oven at the preset temperature -

  • Press the button and the oven will turn on and heat up. The display will revert to show the actual oven temperature.

  • the 2018-01-09_11411.png indicator will show in the display.

if you select 2018-01-11_1348.png , the display will show  and the oven will turn on. The temperature cannot be adjusted when using this function.  

If the display is steadily lit and you wish to change the temperature either:

  1. Rotate the temperature dial; or
  2. Press the 2018-01-11_13314.png button and use the 2018-01-09_11491 copy.png and 2018-01-09_11491.png buttons to increase or decrease temperature.

2a. Adjust the Temperature

There are two ways to set the temperature while the display is flashing:

  • Rotate the temperature dial (clockwise to increase and anticlockwise to decrease the temperature);

    OR
  • Use the 2018-01-09_11491 copy.png and 2018-01-09_11491.png buttons to increase or decrease the set temperature.

  • Press the 2018-01-09_11434.png button. After a few seconds, the display will stop flashing and the oven will turn on and heat up. The display will revert to show the actual oven temperature.

  • The 2018-01-09_11411.png indicator will show in the display.

The temperature indicator light will come on.

 

2018-01-11_13321.png  

3. When the Oven is Preheating and During       Cooking

  • The 2018-01-09_11411.png indicator will show in the display.
  • Then the oven has reached the set temperature the 2018-01-09_11411.png indicator and the temperature indicator light will go out.
these indicators may turn on and off during cooking as the oven maintains the set temperature.  

4a. To Check the Set Temperature

  • Press the 2018-01-11_13314.png button.

  • The display will flash showing the set temperature.

  • After a few seconds the display will return to the actual oven temperature and the display will be steadily lit.

4b. To Check the Time of Day

  • Press the 2018-01-09_11412.png button.
    After a few seconds the display will show the oven temperature again.

2018-01-11_1332.png  

5. When you Have Finished Cooking

  • Turn the function dial to OFF to turn the oven off.
 

if you change functions during cooking (eg from BAKE to BROIL) you will need to press the Screen Shot 2018-01-26 at 11.05.43 AM.png button again.

  • Was this article helpful?