Troubleshooting & Fault Codes
- Troubleshooting Articles
- Burners Click When Trying to Ignite
- Burners Have an Uneven Flame
- Burner Does Not Light
- Condensation
- Display is On but Oven Not Working
- During Self Clean Oven is Louder than Usual
- Excessive Smoking and/or Flames Inside the Oven During a CLEAN Cycle
- Fan does not come on in a Convection Mode
- Fan Noise & Ventilation Air are Coming from the Oven both During & After Use
- Hot Air or Steam Coming from Oven Vents
- Light(s) Not Working
- Occasional, Brief Glowing Inside the Oven During a CLEAN Cycle
- Oven Controls are Unresponsive
- Oven Does Not Work
- Oven Door Glass is Broken, Cracked, Chipped or Shattered
- Oven has Reached Set Temperature but Halo still Red/White
- Oven is Not Heating
- Power Failure - Can I still use the Cooktop?
- Self Clean - The Screen shows No Time Remaining but the Oven Door will Not Open
- Self Clean Function has Finished or Been Cancelled, But Cannot Use Oven
- Temperature Dial Halo Never Turns White When I Use Grill/Broil
- Temperature is Not Calibrated Correctly
- There is an 'Extinction Pop' or Flash After Burner is Turned Off
- There is a Power Cut/Outage During a Self Clean Cycle
- There is No Clicking / Sparking
- The Dial Halos on the Main Oven Flash Red
- The Dial Halos on the Secondary Oven Flash White
- The Fan Comes On When I Select a Function that Does Not Use a Fan (e.g LIGHT or BAKE)
- The Flames are Yellow or Yellow-tipped Rather than Blue
- The Flames have Suddenly gone Out
- The Halo around the Dial Alternates between White & Orange During Use
- The Oven Beeps when I try to Turn the Temperature Dial OFF or Down
- The Oven Door Does Not Align with the Control Panel or Surrounding Cabinetry
- The Oven Door Does Not Open After a Self Clean Cycle
- The Oven is Beeping & Display Shows A2 or A3
- Uneven Baking/Cooking Results