Skip to main content
Fisher & Paykel Product Help

The Flames have Suddenly gone Out

 

Possible Cause What to Do
Draught or Spill The flame failure protection will automatically cut the gas supply to the burner off, stopping unburnt gas from escaping.  Turn the affected burner off, then wait for at least 1 minute before attempting to relight. This is to allow for any small amount of gas that may have escaped to disperse.

Auto Reignition Feature

(Some Models Only)

The auto-reignition feature will recognise this.  The ignitors will spark and attempt to relight the burner.  If the burner fails to relight, turn the burner off, then wait for at least 1 minute before attempting to relight.  This is to allow for any small amount of gas that may have escaped to disperse.

Still Need Help?


You may need assistance from one of our qualified service technicians.
Click on the button below to schedule a visit.

or Contact Us

 

  • Was this article helpful?