Skip to main content
Fisher & Paykel Product Help

Installation Instructions

 Unpacking and Examining Your Microwave Oven


Remove: all packing materials from inside the microwave oven cavity; however, DO NOT REMOVE THE WAVEGUIDE COVER, which is located on the top cavity wall. Read enclosures and SAVE this manual.

Check the microwave oven for any damage, such as misaligned or bent door, damaged door seals and sealing surfaces, broken or loose door hinges and latches and dents inside the cavity or on the door. If there is any damage, do not operate the microwave oven and contact your dealer or DCS AUTHORIZED SERVICER.



Choosing a Location for Your Microwave Oven 


You will use your oven frequently so plan its location for ease of use. Allow at least 2 inches on the sides, top and at the rear of the oven for air circulation.

Your microwave oven can be built into a cabinet or wall by itself or above wall oven models WOSU-30 (DCS by Fisher & Paykel) or OB30SDEPX1 (Fisher & Paykel), using the appropriate (DCS by Fisher & Paykel branded or Fisher & Paykel branded) Microwave Accessory Trim Kit (CMOTTK). It cannot be built in above conventional gas or electric range or any other wall oven.

  • Was this article helpful?